Product ID:COATING, POLYURETHANE COMP B ID 754201
MSDS Date:03/12/1991
FSC:8010
NIIN:01-144-9872
Kit Part:Y
MSDS Number: BNCKD

PRATT & LAMBERT INC., INDUSTRIAL COATINGS DIV.

WICHITA, KS 67201
US

Emergency Phone: 800-255-3924

Info Phone: 316-733-1361

Preparer: W. A. ELLISON

Cage: PRATT

PRATT AND LAMBERT INC

2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

N-BUTYL ACETATE (SOLVENT) (VAPOR PRESSURE 10 MM HG @ 20 C)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 25%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

1,6 HEXANE METHYLENE DIISOCYANATE (RESIN)

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: < 5%

ACGIH TLV: 0.005 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

POLYMERIC HEXAMETHYLENE DIISOCYANATE (RESIN)

CAS: 28182-81-2

RTECS: HQ9170000

Fraction By Weight: 75%

ACGIH TLV: 1 MG/CU M

VOC 2.20 LB/GAL LESS WATER & NPRS* 264 G/L LESS WATER

RTECS: 9999999VO

VOC 3.14 LB/GAL SOLIDS 377 G/L SOLIDS CALCULATED.

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:INGEST: FATAL IF SWALLOWED.
GASTROINTESTINAL IRRIT/NAUSEA/VOMITING. ASPIR OF MAT'L INTO LUNG
MAY CAUSE CHEM PNEUMONITIS. INHAL: VAPOR/SPRAY MIST HARMFUL. MAY
CAUSE LUNG IRRIT/DAMAGE, RESP SENSITIZATIO N/IRRIT, ALLERGIC RESP
REACTION & MAY BE PERMANENT. EYE: SEVERE IRRIT. SKIN: IRRITANT,
SENSITIZATION (ALLERGIC REACTION)
Effects of Overexposure:MAY RESULT IN RESPIRATORY SENSITIZATION. RESP
SENSITIVITY RESULTS IN ASTHMA-LIKE SYMPTOMS ON SUBSEQUENT EXPOSURE
AT CONC EVEN BELOW TLV. POSSIBLE PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.

First Aid:INGEST: DO NOT INDUCE VOMITING. CALL POISON CTR/HOSP EMER
ROOM/DR IMMED. INHAL: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESP IF
STOPPED BREATHING. KEEP WARM/QUIET. GET MED AID IMMED. EYE: FLUSH
W/LG AMOU NTS OF WTR, LIFTING UPPER/LOWER LIDS OCCASSIONALLY FOR 15
MINS. GET MED AID. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
AFFECTED AREA WITH SOAP AND WATER. OBTAIN MED ATTENTION IF
IRRITATION PERSISTS.

Flash Point:72.0F,22.2C
Autoignition Temp:Autoignition Temp Text:300 C
Lower Limits:1.7
Upper Limits:7.6
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISH (CARBON DIOXIDE/ALL
PURP DRY CHEM/ALCOHOL FOAM) FOR FLAMM LIQ FIRES. POLYMER FOAM/LG
FIRES.
Fire Fighting Procedures:WEAR SCBA. WTR MAY BE INEFFECT, USE TO COOL
EXPOSED CNTNRS TO PREVENT PRESS BLD-UP/POSSIBLE AUTO-IGNIT OR EXPLO
WHEN EXPO TO EXTREME HEAT. USE FOG NOZZLES W/WTR
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY
NOT BE IMMEDIATELY APPARENT. OBTAIN MEDICAL ATTN.

Spill Release Procedures:USE NIOSH/MSHA APPROVED, TC19C, AIR-SUPPLIED
BREATHING APPARATUS. EVAC AREA. ELIM ALL IGNIT SOURCES(FLAME/HOT
SURFACE/ELEC/STATIC/FRICTIONAL SPARK). DIKE/CONTAIN SPILL W/INERT
MAT'L(SAND/EARTH) TRANS LIQ TO COVERED METAL CNTNRS FOR
RECOVERY/DISPOSAL*
Neutralizing Agent:N/K */RMV W/INERT ABSORB. USE NON SPARK TOOLS.
PLACE DIKING MAT'L IN COVERED**

Handling and Storage Precautions:DO NOT STORE ABOVE 100 F (38 DEG C)
STORE LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
**METAL CNTNRS FOR DISPOSAL, PREVENT CONTAMINATION*
Other Precautions:*OF SEWERS/STREAMS/GROUNDWATER W/SPILLED MAT'L OR
USED ABSORBENT.

Respiratory Protection:APPROP PROPERLY FITTED POSITIVE PRESS AIR
SUPPLIED RESP (TC 19C NIOSH/MSHA). IF UNAVAILABLE, USE VAPOR
PARTICULATE (PAINT SPRAY) RESP. WEAR RESP FOR WHOLE TIME WHILE
MIXING/SPRAYING/UNTIL VAPORS/MISTS ARE GONE. FOLLOW RESP MFR
DIRECT TO USE
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN SUFFICIENT
VOLUME/PATTERN TO MAINTAIN CONCENTRATIONS OF HAZARD SUBSTANCES
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:SAFETY SPECTACLES/CHEMICAL SPLASH GOGGLE
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
NOTE TO PHYSICIAN: ANY TREATMENT THAT MIGHT BE REQUIRED FOR
OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTROL OF SYMPTOMS AND THE
CLINICAL CONDITIONS.

Boiling Pt:B.P. Text:260 F
Decomp Temp:Decomp Text:1000F,538C
Vapor Pres:10MMHG@68F
Vapor Density:> THAN AIR
Spec Gravity:1.1
pH:4-7STD
Viscosity:>200 CST
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:30

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>100 F (38C) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:BURNING INCLUDING WHEN HEATED BY
WELDING/CUTTING, WILL PRODUCE SMOKE/CARBON MONOXIDE/CARBON DIOXIDE.
OXIDES OF NITROGEN*

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY. DO
NOT INCINERATE CLSD CNTNRS. OBSERVE PRECAUTIONS FOR DISPOSAL OF
FLAMM MAT'L. CONTAM ABSORBANT MAY BE DISPOSED IN A HAZARDOUS WASTE
LANDFILL. DISPOSE ONLY IN ACCORDANCE W/FEDERAL, STATE & LOCAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.